What Professional Dishwasher Installation by a Plumber is Key

Get Started
Dishwasher Repair & Installation Services
From transporting a dish washer right into your home to affixing the water connections, mounting a dishwashing machine can take up to five hours. A plumber will certainly have the right tools on hand and can install your brand-new dishwasher in under 2 hrs.

A Plumber Can Check the Supply Lines


A supply line, particularly a dishwasher adapter, connects the dishwashing machine to a water source. A plumber can ensure that the line is compatible with both your dishwashing machine as well as water resource if you get a new supply line. A professional plumber can examine it to make certain that it's in good problem as well as does not have any type of leakages if you decide to make use of an existing supply line.

An Improper Setup Can Nullify the Dishwashing machine's Service warranty


Prior to setting up a dishwashing machine by yourself, you need to review the warranty meticulously. Even somewhat harming the dish washer throughout the setup process can void the service warranty. Given that the cost of a dishwasher varies in between $300 to $1,000 and also upwards, that can be a pricey mistake. Even if the dishwasher still functions, you will certainly not have the ability to replace it ought to it break shortly. So, unless you come in handy and have experience installing dishwashing machines, you should hire a plumber so you do not risk your guarantee.

Installing a Dishwashing Machine Calls For a Range of Tools


You may need to make a trip to Lowe's or Residence Depot if you do not have a range of tools on hand. To set up a dishwasher, you need the adhering to devices: pliers, a flexible wrench, a set of screwdrivers, a tube cutter, and also hole saws. You will certainly also need cleansing supplies such as a shallow pail as well as sponge. If you do not have any of these products, the cost to acquire them can build up rapidly.

Not Mounting Your Dishwasher Correctly Can Bring About a Mountain of Troubles


Not just can mounting a dish washer correctly void your warranty, but it can likewise produce a mess. If you do not mount the supply line properly, you might deal with leaks-- or even worse, a flood. You may also experience a "water hammer"-- when the water runs also swiftly via your pipes and also causes loud shaking audios. If you incorrectly install your dishwashing machine to the rubbish disposal, you might notice poignant scents or have residue on your recipes.

A Plumber Can End Up the Work Affordably as well as Rapidly


You do not wish to obtain stuck cleaning your dishes by hand. A plumber can mount your dishwashing machine in one to 2 hours. Likewise, the typical plumber won't bill more than a number of hundred dollars to install your dishwashing machine. Why risk your warranty as well as possibly need to get a brand-new dishwashing machine? Take the easy and also secure route by working with a plumber.
From transporting a dishwashing machine into your residence to affixing the water connections, mounting a dishwashing machine can take up to five hrs. To make your life much easier and also to prevent installing a dishwasher incorrectly, we suggest hiring a specialist plumber. A plumber will have the right devices on hand as well as can install your brand-new dish washer in under 2 hours. A supply line, specifically a dishwasher adapter, attaches the dishwasher to a water source. Unless you are helpful and also have experience setting up dishwashers, you must work with a plumber so you do not risk your service warranty.

How To Install A Dishwasher


Installing A Dishwasher Yourself


Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.


Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.


Steps Involved In Dishwasher Installation


Step One: Gather the Necessary Supplies


Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:


  • A screwdriver

  • • A hose clamp

  • • Duct tape (optional)

  • • A brass fitting

  • • Teflon tape

  • • A pair of pliers

  • • An adjustable wrench

  • • A drill

  • • Braided steel water line

  • • A pair of rubber hand gloves (optional)

  • • Wire nuts

  • Step Two: Take Safety Measures


    First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.


    Step Three: Remove the Old Dishwasher


    This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.


    Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.


    Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.


    With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.


    Skip this step if you are having a dishwasher installed for the first time in your kitchen.


    Step Four: Install the New Dishwasher


    Connect the Water Supply


    Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.


    Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.


    Attach the Drain Line


    Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece


    Slide the Dishwasher into Place


    Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.


    Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

    https://www.movementplumbing.com/blog/how-to-install-a-dishwasher



    Pricing

    Leave a Reply

    Your email address will not be published. Required fields are marked *